729388
11
Zoom out
Zoom in
Previous page
1/129
Next page
Installation
11
Also, if using multiple Access Points, adjacent Access
Points should assign different Channels.
2. Connect LAN Cables
Use standard LAN cables to connect PCs to the Switching Hub ports on the Wire-
less ADSL2/2+ Modem Router. Both 10BaseT and 100BaseT connections can be
used simultaneously.
If required, connect any port to a normal port on another Hub, using a standard
LAN cable. Any LAN port on the Wireless ADSL2/2+ Modem Router will automati-
cally function as an "Uplink" port when required.
3. Connect ADSL Cable
Connect the supplied ADSL cable from to the ADSL port on the Wireless
ADSL2/2+ Modem Router (the RJ11 connector) to the ADSL terminator provided
by your phone company.
4. Power Up
Connect the supplied power adapter to the Wireless ADSL2/2+ Modem Router.
Use only the power adapter provided. Using a different one may cause hardware
damage.
5. Check the LEDs
The Power LED should be ON.
The Status LED should flash, and then turn Off. If it stays on or blinking after 60
seconds, there is a hardware error.
For each LAN (PC) connection, one of the LAN LEDs should be ON (provided the
PC is also ON.)
The WLAN LED should be ON
The ADSL LED should be ON if ADSL line is connected.
The Internet LED may be OFF. After configuration, it should come ON.
For more information, refer to Front-mounted LEDs in Chapter 1.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LevelOne WBR-3460 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LevelOne WBR-3460 in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info