729387
106
Zoom out
Zoom in
Previous page
1/112
Next page
Appendix A - Troubleshooting
103
Problem 2:
Some applications do not run properly when using the Wireless
Router.
Solution 2:
The Wireless Router processes the data passing through it, so it is
not transparent.
For incoming connections, you must use the Virtual Server or Firewall
Rules to specify the PC which will receive the incoming traffic.
You can also use the DMZ function. This should work with almost
every application, but:
It is a security risk, since the firewall is disabled.
Only one (1) PC can use this feature.
Wireless Access
Problem 1:
My PC can't locate the Wireless Access Point.
Solution 1:
Check the following.
Your PC is set to Infrastructure Mode. (Access Points are always
in Infrastructure Mode)
The SSID on your PC and the Wireless Access Point are the
same.
Remember that the SSID is case-sensitive. So, for example
"Workgroup" does NOT match "workgroup".
Both your PC and the Wireless Router must have the same
setting for WEP. The default setting for the Wireless Router is
disabled, so your wireless station should also have WEP dis-
abled.
If WEP is enabled on the Wireless Router, your PC must have
WEP enabled, and the key must match.
If the Wireless Router's Wireless screen is set to Allow Trusted
PCs only, then each of your Wireless stations must have been
designated as "Trusted", or the Wireless station will be blocked.
To see if radio interference is causing a problem, see if connec-
tion is possible when close to the Wireless Router.
Remember that the connection range can be as little as 100 feet
in poor environments.
Problem 2:
Wireless connection speed is very slow.
Solution 2:
The wireless system will connect at the highest possible speed,
depending on the distance and the environment. To obtain the high-
est possible connection speed, you can experiment with the following:
Wireless Router location.
Try adjusting the location and orientation of the Wireless Router.
Wireless Channel
If interference is the problem, changing to another channel may
show a marked improvement.
Radio Interference
Other devices may be causing interference. You can experiment
by switching other devices Off, and see if this helps. Any "noisy"
devices should be shielded or relocated.
RF Shielding
106


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LevelOne WBR-3418 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LevelOne WBR-3418 in the language / languages: English as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info