729379
62
Zoom out
Zoom in
Previous page
1/72
Next page
Advanced Configuration
If the MAC address is changed, the LevelOne
22Mbps Wireless AP Router must restart.
Routing
Overview
If you don't have other Routers or Gateways on your LAN, you can ignore the "Routing"
page completely.
If the LevelOne 22Mbps Wireless AP Router is only acting as a Gateway for the local
LAN segment, ignore the "Routing" page even if your LAN has other Routers.
If your LAN has a standard Router (e.g. Cisco) on your LAN, and the LevelOne 22Mbps
Wireless AP Router is to act as a Gateway for all LAN segments, enable RIP (Routing In-
formation Protocol) and ignore the Static Routing table.
If your LAN has other Gateways and Routers, and you wish to control which LAN seg-
ments use each Gateway, do NOT enable RIP (Routing Information Protocol). Configure
the Static Routing table instead. (You also need to configure the other Routers.)
If using Windows 2000 Data center Server as a software Router, enable RIP on the Leve-
lOne 22Mbps Wireless AP Router, and ensure the following Windows 2000 settings are
correct:
Open Routing and Remote Access
In the console tree, select Routing and Remote Access , [server name], IP Routing,
RIP
In the "Details" pane, right-click the interface you want to configure for RIP version
2, and then click "Properties".
On the "General" tab, set Outgoing packet protocol to "RIP version 2 broadcast", and
Incoming packet protocol to "RIP version 1 and 2".
Routing Screen
The routing table is accessed by the Routing link on the Advanced screen.
Using this Screen
Generally, you will use either RIP (Routing Information Protocol) OR the Static Routing
Table, as explained above, although is it possible to use both methods simultaneously.
Static Routing Table
If RIP is not used, an entry in the routing table is required for each LAN segment on your
Network, other than the segment to which this device is attached.
The other Routers must also be configured. See Configuring Other Routers on your LAN
later in this chapter for further details and an example.
59
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LevelOne WBR-2400TX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LevelOne WBR-2400TX in the language / languages: English as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info