729379
10
Zoom out
Zoom in
Previous page
1/72
Next page
Installation
2. Connect LAN Cables
Use standard LAN cables to connect PCs to the Switching Hub ports on the LevelOne
22Mbps Wireless AP Router. Both 10BaseT and 100BaseT connections can be used si-
multaneously.
Note: Any port will automatically function as an "Uplink" port when required. You can
connect any port to a standard port on another hub, using a standard cable.
3. Connect WAN Cable
Connect the DSL or Cable modem to the WAN port on the LevelOne 22Mbps Wireless
AP Router. Use the cable supplied with your DSL/Cable modem. If no cable was supplied,
use a standard cable.
4. Power Up
Power on the Cable or DSL modem.
Connect the supplied power adapter to the LevelOne 22Mbps Wireless AP Router and
power up.
Use only the power adapter provided. Using a different one may cause hardware damage
5. Check the LEDs
The Power LED should be ON.
The Status LED should flash, then turn OFF. If it stays on, there is a hardware error.
For each LAN (PC) connection, the LAN Link/Act LED should be ON (provided the PC is
also ON.)
The WAN LED should be ON.
The WLAN LED should be ON
For more information, refer to the Front Panel section in Chapter 1.
7
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LevelOne WBR-2400TX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LevelOne WBR-2400TX in the language / languages: English as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info