729375
102
Zoom out
Zoom in
Previous page
1/109
Next page
99
C
Appendix C
AT Commands
AT Commands
This Appendix details the "AT" commands used by modems and ISDN TAs. This information
is provided to assist users who are using the serial port of LevelOne WBR-1100TX.
It is not relevant to Cable or DSL modems connected to the WAN (Ethernet) port.
Required Settings
For the LevelOne Wireless Broadband Router to use the Serial Port correctly, the modem or
ISDN TA must be set as follows.
Setting AT Command
Fixed baud rate setting AT&B1
RTS/CTS flow control AT&K3
DCD to track the presence of a carrier AT&C1
DTR off to hang-up modem AT&D2
DSR always on AT&S0
If your Modem or ISDN TA uses the commands above, then the Initial String would be as
follows:
AT&F&B1&K3&C1&D2&S0X4
Notes:
The command "AT&F" is used to set the modem to the factory default settings, to ensure a
consistent starting point.
For some Mircocom and other modems, the "ATX4" command is not sufficient - a "W2"
command (no "AT") must be used as well.
ISDN TAs may not use these commands; please check your user guide for your ISDN TA.
Finding the current Initial String
If your modem or ISDN TA is already working correctly using the PC's serial port, but you
don’t know what the initialization string is, you can use the following procedure to find out.
1. Select My Computer, then Dial-Up Networking.
2. Select the icon for your connection, then Properties.
3. Click the Configure button, then the Connection tab, as shown below.
102


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LevelOne WBR-1400TX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LevelOne WBR-1400TX in the language / languages: English as an attachment in your email.

The manual is 2,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info