729375
12
Zoom out
Zoom in
Previous page
1/109
Next page
Introduction
Connections - WBR-1400TX
Figure 3: Connections - WBR-1400TX
Printer Port
A standard parallel printer port is on the side panel. If you wish to share a
printer, connect it here.
PCMCIA slot
Insert the supplied Wireless PCMCIA card into this slot.
Ensure the power is OFF before inserting or removing the
PCMCIA Card.
Do not use any other PCMCIA Card.
Reset Button
This button has three (3) functions:
Reboot. When pressed and released, the LevelOne Wireless Broad-
band Router will reboot (restart).
Diagnostic print-out. If held down for 3 seconds, a diagnostic
print-out will be sent to the attached printer.
Ensure the printer is ready.
Both Print LEDs will flash simultaneously during the diagnostic
printing.
Clear All Data. This button can also be used to clear ALL data and
restore ALL settings to the factory default values.
To Clear All Data and restore the factory default values:
7. Power Off.
8. Hold the Reset Button down while you Power On.
9. Keep holding the Reset Button for a few seconds, until the RED
Status LED has flashed TWICE.
10. Release the Reset Button. The LevelOne Wireless Broadband Router
is now using the factory default values.
WAN port
(10BaseT)
Connect the DSL or Cable Modem here. If your modem came with a
cable, use the supplied cable. Otherwise, use a standard LAN cable.
10/100BaseT
LAN ports
(Hub ports)
Use standard LAN cables (RJ45 connectors) to connect your PCs to these
switching hub ports. Both 10BaseT and 100BaseT connections can be
used simultaneously.
Note:
Any LAN port on the LevelOne WBR-1400TX will automatically
function as an "Uplink" port when required. Just connect any port to a
normal port on the other hub, using a standard LAN cable.
Power port
Connect the supplied power adapter here.
9
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LevelOne WBR-1400TX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LevelOne WBR-1400TX in the language / languages: English as an attachment in your email.

The manual is 2,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info