729378
107
Zoom out
Zoom in
Previous page
1/118
Next page
LevelOne WBR-1101TX User Guide
Dial-in Access
Problem 1: Remote PC can't connect to the LevelOne WBR-1101TX.
Solution 1: Check the settings on the LevelOne WBR-1101TX
Dial-in is Enabled.
User has been created, and has Dial-in permission.
Call-back settings are correct for this user.
Modem settings are correct.
Both the LevelOne WBR-1101TX and the remote PC are using the
same settings for the login authentication (PAP, CHAP, MSCHAP).
Check the Modem
Modem is properly connected and powered on.
The modem is working correctly, and the Remote user is dialing the
correct telephone number for the modem.
This can be checked by listening to the modem. You should hear the
LevelOne WBR-1101TX's modem answer the incoming call.
If the call is received but not answered, the modem's "Auto-
answer" feature is turned OFF. To turn it on, add the appropriate
AT command to the Initial String in the on the LevelOne WBR-
1101TX's Modem Properties screen. See Chapter 6 for details of
the Modem Properties screen, and Appendix C for more informa-
tion on AT commands.
If the call is answered, but no connection is established, then ei-
ther the modems are unable to negotiate a connection, or the login
to the LevelOne WBR-1101TX has failed.
This can be checked by examining the Log file for the Remote
PC. See Finding the current Initial String in Appendix C for in-
structions on enabling and viewing the Log file.
Check the Remote PC
Ensure that both the LevelOne WBR-1101TX and the remote PC are
using the same settings for the login authentication (PAP, CHAP,
MSCHAP).
When prompted for "User Name" and "Password", the remote user
must enter the correct User Name and Password, as configured on the
LevelOne WBR-1101TX's User Details screen.
The modem Log file on the remote PC may provide useful informa-
tion about the cause of the connection failure. See Finding the current
Initial String in Appendix C for instructions on enabling and viewing
the Log file.
Problem 2: Remote PC can connect, but can't access LAN resources.
Answer 2: You can only access LAN resources which use TCP/IP, such as Web, FTP
and E-Mail Servers. Microsoft networking and similar services are not
available.
Problem 3: On the LAN, there is an IP Address conflict involving the Dial-in PC.
How do I set the IP Address allocated to the Dial-in PC?
Answer 3: This problem can only occur if the LevelOne WBR-1101TX's DHCP
SiDibld
104
107


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LevelOne WBR-1101TX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LevelOne WBR-1101TX in the language / languages: English as an attachment in your email.

The manual is 2,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info