729378
13
Zoom out
Zoom in
Previous page
1/118
Next page
LevelOne WBR-1101TX User Guide
2. Insert Wireless PCMCIA card
Ensuring the supplied Wireless PCMCIA card is the right way up, insert it into the slot on
the rear. Push it firmly until it clicks into position.
3. Set the ISDN/WAN Push Button
The ISDN/WAN push button is on the rear panel. Ensure it is set correctly:
Depressed (in) - ISDN port is active.
Extended (out) - WAN port is active.
The WAN port and ISDN ports can NOT be used simulta-
neously. The ISDN/WAN push button on the rear panel
determines which port is active.
4. Connect WAN cable OR ISDN cable
If you have a Broadband modem, connect it to the WAN port on the LevelOne WBR-
1101TX. Use the cable supplied with your broadband modem. If no cable was supplied,
use a standard LAN cable.
If using an ISDN connection, connect the ISDN port on the LevelOne WBR-1101TX to
the S/T connector on your ISDN NT1 (Network Terminator 1).
5. Connect LAN Cable
Connect a standard LAN cable from a 10BaseT or 100BaseT Hub on your LAN to the
"HUB" port on the LevelOne WBR-1101TX.
6. Connect Serial Port Modem (optional)
If you wish to use an Analog modem or external ISDN TA, use a standard serial cable to
connect it to the Serial port on the LevelOne WBR-1101TX.
7. Connect Printer Cable
Use a standard parallel printer cable to connect your printer to the Printer port on the Leve-
lOne WBR-1101TX.
8. Power Up
Connect the supplied power adapter and power up.
Use only the power adapter provided.
9. Check the LEDs
The Power LED should be ON.
The Status LED should flash, then turn Off. If it stays on, there is a hardware error.
One (1) of the LAN LEDs (10 or 100) should be ON.
The Wireless LED should be ON.
If the printer is On and On-line, the Print Act LED should be ON.
If using the WAN port, the WAN LED should be ON. (If it is not, check that the Broad-
band modem is connected and ON.)
If using the ISDN port, the ISDN LED should be OFF. It will not come On until a connec-
tion to your ISP is established.
For more information, refer to Front-mounted LEDs in Chapter 1.
10
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LevelOne WBR-1101TX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LevelOne WBR-1101TX in the language / languages: English as an attachment in your email.

The manual is 2,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info