601143
6
Zoom out
Zoom in
Previous page
1/20
Next page
- 4 -
3. Position the sewing foot
s
to be mounted with the base lying on the
stitch plate
a
in such a manner that the suspension pin on the foot and
the slot on the foot spindle are directly in line.
4. Lower the lifting lever
g
and complete connection of the sewing foot
s
with the sewing spindle. When the foot is correctly positioned, it
must click into place at the suspension pin of the foot.
Changeover to free arm operation
Sewing with the free arm option is suitable for tube-shaped fabrics and
areas which are difficult to access on garments and other fabrics.
To change your machine over to free arm operation simply remove the
sewing table extension
p
.
1. Raise the table extension
p
until it is released from the catch.
2. Pull the sewing table extension
p
out towards the left.
Operating elements
Notice
Whenever you change the type of stitch, ALWAYS bring the
needle into the highest position to prevent it being damaged.
In order to select a specific type of stitch, turn the stitch pattern
selector
w
, until the number of the required stitch type can be seen
in the inspection slot
q
.
Notice
All stitch patterns have preset stitch widths, which means that the type
of stitch selected is the only setting value required to be chosen by the
user. The following table shows the preset stitch width for every type
of stitch and the relevant recommended stitch length range.
Notice
Prior to setting the stitch pattern selector
w
by turning the stitch pattern
selector
w
you must relieve the sewing foot
s
by activating the lifting
lever
g
and removing the needle from the fabric.
13 14 15 16 17 18 19 20 21
123456789101112
IB_KH4001_E2719_GB_LB3-6 22.04.2008 16:50 Uhr Seite 4
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lervia KH 4001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lervia KH 4001 in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lervia KH 4001

Lervia KH 4001 User Manual - German, Dutch, French, Italian, Portuguese - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info