- 21 -
j) Blind hem
• Fold the material as shown. Make the fold as
wide as you want the finished seam to be: The
lower fold should be inset by about 5 mm.
• Use the blind hem foot . While sewing,
check the hem width and needle position
to be sure the hem is even.
• Sew the blind hem on the underside of the
material, so that only the peak of the zigzag
stitch pierces the top part of the material.
When you have finished sewing, push the
left of the material over to the right and
smooth out. The seam is almost invisible!
The table on the next page shows a suggestion
for setting the various values depending on the
material used.
Lervia KH 4000
