- 14 -
c) Changing the snap-on foot
With the sewing machine you are provided
with four snap-on-feet, which you can simply
use as required:
blind hem foot
zipper foot
buttonhole foot
button foot
To change the snap-on foot:
• Turn the handwheel
s
in an anti-clockwise
direction to fully raise the needle.
• Position the foot lever
j
in the upward posi-
tion in order to lift the needle retainer
;
up.
• Press the lever upward. The snap-on foot
can now be easily removed from the needle
retainer
;
.
• Now place the new snap-on foot under the
needle retainer
;
. Make certain that the
notch on the needle retainer is located direct-
ly above the metal pin of the snap-on foot.
• Press the foot lever
j
back down and let the
needle retainer
;
slide into the snap-on foot.
To uninstall the needle retainer
;
:
• Loosen the foot screw and pull the
needle retainer
;
off
downward, including the finger protector .
To install the needle retainer
;
:
• Place the needle retainer
;
including finger
protector back onto the guide rod and
tighten the foot screw again.