- 6 -
6. Setting up
• Place the sewing machine on a stabile table.
• Plug the foot switch into the connection
socket
g
of the machine and ...
• insert the plug into the wall socket.
If the worktop is not completely even, you can
compensate for slight unevenness as follows:
• Pull the box compartment
2@
off to the
side, it is only slid on, not firmly attached.
• You can turn the adjusting foot
1&
that
becomes visible underneath in order to
make the sewing machine rest properly.
You can simply slide the box compartment
2@
back on – for instance if you need this as an
"extension table" for sewing large material.
You can also leave the box compartment
2@
off, for example for free-arm sewing of arms,
trouser legs, etc. The box compartment
2@
is
also used to store the accessories.
7. Switching On / Off
You should familiarize yourself with these
methods of switching on and off, so that you
can take the correct action in the event of an
emergency:
• You can switch the sewing machine on
or off by pressing the switch
1#
. The bulb
2%
indicates the operating state.
• If you pull out the foot switch plug, the
machine is without power.
• If you pull the power plug from the socket,
the machine and the foot switch are without
power.
Lervia KH 4000
2@