558493
22
Zoom out
Zoom in
Previous page
1/34
Next page
- 20 -
Place the temperature regulator 7 into the position
"MAX".
Heat the steam iron up for several minutes at this
highest setting.
Remove the steam iron from the station q
(see chapter “Tips for utilisation”).
Then iron a piece of material that is no longer
required, to remove possible contamination from
the sole of the iron e.
Tips for utilisation
In addition to the typical utilisation with a cable,
you can also separate the steam iron from the cable
base 8 for a short period to iron textiles which are
not located close to an electrical power socket.
To separate the steam iron from the cable base 8:
Place the steam iron, with the cable base 8
engaged, onto the station q. The unlocking
switch 0 must be in the position .
Slide the unlocking switch 0 into the
position . The steam iron now allows itself
to be lifted off. The cable base 8 remains
combined with the station q.
Note:
As the steam iron cannot be heated up without the
cable base 8, you can only work for a short period
without the cable base 8. Reconnect the steam iron
with the cable base 8 as soon as the steam blast
or the ironing quality diminishes.
To reconnect the steam iron with the cable base 8:
Insert the steam iron into the cable base 8
connected to the station q. Slide the unlocking
switch 0 to . You can now lift the steam
iron with the cable base 8 from the station q.
Should you wish to secure the steam iron to the
station q, for safekeeping for example, slide the un-
locking switch 0 with the preplaced steam iron to .
The steam iron can now no longer be removed from
the station q.
Operation
Filling with mains water
In a cooled condition, place the steam iron
horizontally on its sole e.
Slide off the cover of the filler opening for the
water tank 2.
Using the measuring beaker, fill the water tank
with water to the "Max" marking, but no further.
Slide the cover of the filler opening for the water
tank 2 back to close it.
Note
Should the mains water at your locality be rated as
hard, it is recommended that you mix mains water
with some distilled water. Otherwise, the jets for the
steam blast function could calcify (become blocked)
prematurely.
To extend the optimal steam blast function, mix
mains water with distilled water according to the
table.
IB_KH1283_E40978_LB5 23.09.2008 14:47 Uhr Seite 20
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lervia KH 1283 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lervia KH 1283 in the language / languages: English, Italian, Spanish as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lervia KH 1283

Lervia KH 1283 User Manual - German, Dutch, French - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info