638877
28
Zoom out
Zoom in
Previous page
1/48
Next page
7. Press the on/off button to deactivate the
appliance and to confirm the setting.
How to deactivate again the acoustic
signal for the end of programme
1. Refer to “How to activate the acoustic
signal for the end of programme” and
follow the procedure from step (1) to
step (5). The end indicator is on.
2. Press the programme button. The end
indicator goes off. The acoustic signal
for the end of programme is deactiva-
ted.
3. Press the on/off button to deactivate the
appliance and to confirm the setting.
BEFORE FIRST USE
1. Make sure that the set level of the water
softener agrees with the water hardness
in your area. If not, adjust the water
softener. Contact your local water au-
thority to know the water hardness in
your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the ap-
pliance. Start a programme to remove
them. Do not use detergent and do not
load the baskets.
Adjusting the water softener
Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l Clarke
degrees
Level
47 - 50 84 - 90 8.4. - 9.0 58 - 63 10
43 - 46 76 - 83 7.6 - 8.3 53 - 57 9
37 - 42 65 - 75 6.5 - 7.5 46 - 52 8
29 - 36 51 - 64 5.1 - 6.4 36 - 45 7
23 - 28 40 - 50 4.0 - 5.0 28 - 35 6
19 - 22 33 - 39 3.3 - 3.9 23 - 27
5
1)
15 - 18 26 - 32 2.6 - 3.2 18 - 22 4
11 - 14 19 - 25 1.9 - 2.5 13 - 17 3
4 - 10 7 - 18 0.7 - 1.8 5 - 12 2
< 4 < 7 < 0.7 < 5
1
2)
1) Factory position.
2) Do not use salt at this level.
Electronic adjustment
1. Press the on/off button to activate the
appliance.
2. If necessary, do the Reset function.
3. Press and hold the programme button
until the programme indicator
starts
to flash and the programme indicator
comes on with fixed light.
4. Wait until the programme indicator
goes off and the end indicator
starts to flash. The programme indicator
continues to flash.
5. Press the programme button. The end
indicator starts to flash. The intermittent
flashing of the end indicator refers to the
current set level.
E.g. 5 flashes + pause + 5 flashes =
level 5.
6. Press the programme button again and
again to change the setting. Each time
you press the programme button the
level number increases.
28 leonard
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Leonard LV1520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Leonard LV1520 in the language / languages: English, Dutch, Danish, French as an attachment in your email.

The manual is 5,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Leonard LV1520

Leonard LV1520 User Manual - German, Italian, Spanish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info