Manual Leonard LK1244 (page 21 of 52) (English, German, Dutch, French)

638815

Zoom out

Zoom in

1/52

Problem Possible cause Solution

The lamp is defective. Refer to "Replacing the

lamp".

The compressor operates

continually.

Temperature is set incorrect-

ly.

Refer to "Operation" chapter.

Many food products to be

frozen were put in at the

same time.

Wait a few hours and then

check the temperature again.

The room temperature is too

high.

Refer to climate class chart

on the rating plate.

Food products placed in the

appliance were too warm.

Allow food products to cool

to room temperature before

storing.

The door is not closed cor-

rectly.

Refer to "Closing the door".

There is too much frost and

ice.

The door is not closed cor-

rectly or the gasket is de-

formed/dirty.

Refer to "Closing the door".

The water drainage plug is

not correctly positioned.

Position the water drainage

plug in the correct way.

Food products are not wrap-

ped properly.

Wrap the food products bet-

ter.

Temperature is set incorrect-

ly.

Refer to "Operation" chapter.

Water flows on the rear plate

of the refrigerator.

During the automatic defrost-

ing process, frost melts on

the rear plate.

This is correct.

Water flows into the refrigera-

tor.

The water outlet is clogged. Clean the water outlet.

Food products prevent that

water flows into the water

collector.

Make sure that food prod-

ucts do not touch the rear

plate.

Water flows on the floor. The melting water outlet is

not connected to the evapo-

rative tray above the com-

pressor.

Attach the melting water out-

let to the evaporative tray.

The temperature in the appli-

ance is too low/too high.

The temperature regulator is

not set correctly.

Set a higher/lower tempera-

ture.

The door is not closed cor-

rectly.

Refer to "Closing the door".

Leonard 21

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Leonard LK1244 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Leonard LK1244 Manual

Product: