Description: Balanced: Balance sound, temperature, and performance.
• CPU Power Management
Values: Disabled, Enabled
Description: Enable or disable the power-saving feature that stops the microprocessor clock automatically
when there are no system activities. Normally, it is not necessary to change the setting.
• Power On with AC Attach
Values: Disabled, Enabled
Description: Enable or disable a feature that turns on the computer when the ac power adapter is
attached.
• Disable Built-in Battery
Values: Yes, No
Description: Temporary disable battery for servicing the system. After selecting this item, the system will
be automatically powered off, then ready to be serviced.
Note: The battery will be automatically enabled when the ac power adapter is reconnected.
Beep and Alarm
• Password Beep
Values: Disabled, Enabled
Description: Enable or disable a beep when the computer is waiting for a power-on, hard disk, or
supervisor password. Different beeps remind you that the password you entered is right or wrong.
• Keyboard Beep
Values: Enabled, Disabled
Description: Enable or disable a beep when unmanageable key combinations are pressed.
Thunderbolt(TM) 3
• Wake by Thunderbolt(TM) 3
Values: Disabled, Enabled
Descriptions: Enable or disable Wake Feature with Thunderbolt(TM) 3 Port. If you select Enabled, the
battery life during the low power state might become shorter.
• Security level
Values: No Security, User Authorization, Secure Connect, Display Port and USB
Description: Select the security level:
– No Security: Allow Thunderbolt devices to be connected automatically.
– User Authorization: Allow Thunderbolt devices to be connected after user authorization.
– Secure Connect: Allow Thunderbolt devices to be connected with a saved key that has been approved
by the user.
– Display Port and USB: Allow only Display outputs and USB devices to be connected. Thunderbolt
devices are not allowed to be connected.
• Support in Pre Boot Environment:
– Thunderbolt(TM) device
Values: Disabled, Enabled
Descriptions: Enable or disable pre-OS support for Thunderbolt(TM) devices attached to the
Thunderbolt (TM) 3 port. To use a device in the pre-boot environment, authorize it in the operating
62
X380 Yoga User Guide