718888
26
Zoom out
Zoom in
Previous page
1/36
Next page
Chapter 3. Reference information 3-4
Table3-2.Troubleshooting(continued)
Problem Possible cause Suggested action Reference
Screen is blank and
power indicator is
steady amber or
flashing green
The monitor is in
Standby/Suspend
mode
Press any key on the
keyboard or move the
mouse to restore
operation.
Check the Power options
settings on your computer.
Understanding power
management” on page
2-10
The power indicator
is green, but there is
no image.
The video signal cable
is loose or
disconnected from the
system or monitor.
Be sure the video cable is
connected with the system
properly.
Connecting and turning
on your monitor
” on
page 1-4
The power indicator
is green, but there is
no image.
The monitor
brightness and
contrast are at the
lowest setting.
Adjust the brightness and
contrast setting on the OSD
menu.
Adjusting your monitor
image” on page 2-6
One or more of the
pixels appear
discoloured
This is a characteristic
of the LCD
technology and is not
an LCD defect.
If there are more than five
pixels missing, contact the
Customer Support Centre.
Appendix A, “Service
and Support” on page
A-1
Fuzzy lines in text
or a blurry image.
Horizontal or
vertical lines
through the image.
Image setup has not
been optimized
Your system Display
Properties setting
have not been
optimized.
Adjust the resolution settings
on your system to match the
native resolution for this
monitor:
1920 x 1200 at 60 Hz.
Adjusting your monitor
image” on page 2-6
Fuzzy lines in text
or a blurry image.
Horizontal or
vertical lines
through the image.
Image setup has not
been optimized
Your system Display
Properties setting
have not been
optimized.
Perform automatic image
setup. If automatic image
setup does not help, perform
manual image setup.
Selecting a supported
display mode” on page
2-9
Fuzzy lines in text
or a blurry image.
Horizontal or
vertical lines
through the image.
Image setup has not
been optimized
Your system Display
Properties setting
have not been
optimized.
When working in the native
resolution, you may find
additional improvements by
adjusting the Dots Per Inch
(DPI) setting on your system.
See the Advanced section
of your system’s display
properties.
The image is not
acceptable when
switching to dual
mode
It has not set the
optimum resolution
for each mode
● Use ThinkVision Duo
software to optimize the
dual screen operation
● Adjust graphic card
resolution manually
Using the direct access
controls” on page 2-6
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenovo T23D Thinkvision at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenovo T23D Thinkvision in the language / languages: English as an attachment in your email.

The manual is 1,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info