214280
37
Zoom out
Zoom in
Previous page
1/62
Next page
Appendix B. Troubleshooting your setup
This section provides information on setup troubleshooting.
The LED on top of the projector’s keypad indicates the state of the projector and
can help you troubleshoot. The following table describes LED behavior and
meaning.
LED color/behavior Meaning
solid green The projector is plugged in, or the projector
has been turned on and the software has
initialized. The projector has been turned off
and the fans have stopped.
blinking green The power button has been pressed and the
software is initializing, or the projector is
powering down and the fans are running to
cool the lamp.
blinking red A fan or lamp failure has occurred. Make
sure the vents aren’t blocked.Turn off the
projector and wait one minute, then turn the
projector on again. If the projector has been
working for 3000 hours or more, replace the
lamp and reset the lamp timer. Contact
Technical Support if the problem persists.
solid red An unidentifiable error: please contact
Technical Support.
The following table shows common problems. In some cases, more than one
solution is possible. Try the solutions in the order they are presented.
Problem Solution
No startup screen
v Plug in power cable and remove lens cap.
v Press Power button
Only startup screen appears
v Press the Computer button.
v Activate laptop’s external port.
v Restart laptop.
No computer image Set your computer’s display resolution to
the native resolution of the projector (Start
-> Settings -> Control Panel -> Display ->
Settings tab, select 1024x768). For a laptop,
turn on dual-display mode.
Image fuzzy or cropped Set your computer’s display resolution to
the native resolution of the projector (Start
-> Settings -> Control Panel -> Display ->
Settings tab, select 1024x768). For a laptop,
turn on dual-display mode.
Remote control not controlling my
computer’s mouse
Connect computer cable, then load USB
drivers, if needed.
Image not square Adjust keystone on keypad.
© Copyright IBM Corp. 2003 27
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenovo ilc300 conference room at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenovo ilc300 conference room in the language / languages: English as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info