601657
4
Zoom out
Zoom in
Previous page
1/37
Next page
UK-3
3. After the alarm wake-up time is set, you will continue to go for the alarm wake-up mode settings -
repeatedly press the or button for the selections followed by pressing the ALARM button to
confirm, first set the alarm wake-up volume level (01-32), then the wake-up radio station (P01-P10),
and finally the buzzer tone (HI/LO). (F. 6) (F. 7) (F. 8)
4. After the confirmation of the buzzer tone selection, the alarm set up is completed.
5. To check the alarm settings, press the ALARM button once, the alarm wake-up time and the wake-up
mode settings will be displayed one by one in two seconds intervals.
Activating the alarm and the wake-up mode
1. Repeatedly press on the ALARM button to activate the alarm function and select the wake-up mode,
the alarm icon and the corresponding wake-up mode will appear in the display on every press:
Tuner > USB > Buzzer > OFF > Tuner > USB > … ….
2. When your desired wake-up mode appears in the display, release the buttons, the alarm function is
now activated and the alarm icon will be displayed. (F. 9)
3. At the selected wake-up time, the selected wake-up mode will be on and the alarm icon in the display
will flash to indicate the alarm is triggered. It will continue for one hour and then shut off
automatically. To stop the alarm sooner, press the button once.
Note: If alarm wake-up to USB is selected and no USB is being inserted or recognized, when the alarm
arrives, the buzzer sound will be activated in place automatically.
Automatic alarm repeat
The alarm will automatically repeat each day at the selected wake-up time as long as the alarm icon is
displayed (alarm function on). To cancel the alarm, repeatedly press the ALARM button until the display
shows “OFF, and the alarm icon will be disappeared.
Snooze function
During alarm, press the SNOOZE button will temporary switch off the alarm for 5 minutes and the snooze
icon will be displayed. This is repeatable in the one hour alarm duration. (F. 10)
LISTENING TO THE RADIO
When the unit is powered up and switched on for the first time, it will automatically enter into the FM radio
mode. To select radio mode during other operation modes, repeatedly press the MODE button on the front
panel until “TUNER” and the FM frequency are displayed. (F. 11)
Manual tuning
1. To select jog dial manual tuning, first press on the VOLUME/SCROLL control once, then rotate the
same control until you read the correct frequency or the reception is at its best.
2. The display will show the stereo icon if a FM stereo station is received. To select FM mono reception,
press the ►/II button, and the stereo icon will disappear in the display. (F.12)
Automatic tuning
1. Press and hold the VOLUME/SCROLL control for longer than two seconds to scan up or down the
frequency band, it will automatically search for the first station of sufficient signal strength.
2. Repeat the above procedure if you wish to search for another station.
F.4
F.6 F.7
F.5
F.8
F.9 F.10
II
II
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco SR-03 BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco SR-03 BT in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info