694784

Lenco SCD-69 Manual

11
Zoom out
Zoom in
Previous page
1/64
Next page
11
Set date format - You could change the date format on the display.
Date format options:
DD-MM-YYYY(default)
MM-DD-YYYY
Backlight – You could adjust the level of backlight in different scenarios.
Timeout – LCD backlight will switch off in corresponding duration.
Timeout options: On(default)/10/20/30/45/60/90/120/180 seconds
On level – It represents the LCD backlight level during working.
On Level options: High(default)/Medium/Low
Dim level – It represents the LCD backlight level during standby mode.
Dim Level options: High(default)/Medium/Low
Language – There have 4 languages option.
Language options: English/French/Dutch/Italian
Factory Reset – A factory reset clears all user defined settings, replacing them with
the original default values, so time/date, preferences/settings, DAB station list and
preset stations are all lost.
SW version – It shows the software version of the player.
Trouble Shooting
Problem: Solutions:
The device does not turn on Make sure the AC power cord is connected to the
correctly.
The CD player does not play even
when a CD is in place
Place the CD with label side up.
Clean the CD.
FM Hiss/DAB Burbling/intermittent
cut-out/DAB No stations available
message
Check/move antenna. Move radio. Rescan local
(high-strength) stations only. (For DAB, check local
coverage at www.ukdigitalradio.com/coverage then
rescan stations).
Error messages
Error messages Meaning
‘Service not available’ No DAB reception.
‘Signal error’ The DAB signal has been interrupted.
‘No DAB Station’ The listed station cannot be found. (No Name): The current
station does not broadcast an identity name.
‘No stations found’ No DAB stations are available, check aerial.
‘No Radio Text’ No RDS text information is available on this station.
‘No PTY’ No RDS programme type information is available.
‘No Name’ No RDS station name is being broadcast.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco SCD-69 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco SCD-69 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 5,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info