Manual Lenco PR-2700 (page 19 of 49) (English, German, Dutch, French, Spanish)

694819

Zoom out

Zoom in

1/49

The Alarm is activated:

1. The alarm on will only work in standby mode

2. When the alarm is sounding, the ALARM Symbol on the display will flash.

3. When the alarm is sounding, Pressing the MEMORY/ALARM button will stop the alarm.

When the alarm is activated, press the SNOOZE/DIMMER to stop the alarm for 9 minutes. (the snooze function

can be active for 1 hour).

Remark: Alarm volume value is last power off

7. System display Backlight:

The brightness of the display can be changed.

Dimmer:

press the SNOOZE/DIMMER button repeatedly to select different brightness of the display screen:

Dim 1 Dim 2Dim 3

8. VOLUME

Use the VOL+/VOL‐ buttons to adjust the volume between 0 and 32 (Default value is 15).

The volume level setting will be stored when the unit is powered off. When powered on again the last known

volume level will be used.

9. RADIO FREQUENCY TUNING

For tuning you can use the SKIP+/SKIP‐ buttons.

Radio preset programming

A total of 20 FM stations can be stored in the system memory.

1. In Tuner mode you can use SKIP+/SKIP‐ buttons to scan for your favorite station. To save it as preset, press the

MEMORY button for 2 seconds. “P01” will be blinking on the display. Use the SKIP+/SKIP‐ keys to select the

desired preset number (max 20) and press the MEMORY but ton again to store the preset.

2. Note: If you don’t press any key within 10 seconds the unit will close the programming mode and no preset will

be stored

3. Retrieving the preset stations press Memory to access a preset station.

RDS information display

TheRadioDataSystem(RDS)isabroadcastingservicewhich allows stations to send additional information

along with the regular radio programmed signal. (RDS works on the in FM waveband only).

1. Tune to an FM RDS station, The Programmed Service name (station’s name) appears on the display.

2. Each time the RDS button is pressed, the RDS mode is changed as PS (Programmed Service name) → PTY

(Programmed Type) → RT (Radio Text)

Remark:

1. PS (Programmed Service name):When you select PS, the frequency will be displayed for 3 seconds, and then

PS (station’s name) will be displayed. If there is no PS data, “NO PS” will be displayed.

2. PTY (Programmed Type): W hen you select PTY, the programmed type will be displayed. If there is no PTY

data, “NO PTY” will be displayed.

3. RT (Radio Text): When you select RT, the new of stations composed of up to 64 symbols will be displayed. If

there is no RT data, “NO RT” will be displayed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lenco PR-2700 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 3,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lenco PR-2700 Manual

Product: