Manual Lenco PDR-065 (page 7 of 77) (English, German, Dutch, French, Spanish)

803306

Zoom out

Zoom in

1/77

Setting the Time & Date

The clock will synchronize to RDS/DAB clock once receiving the RDS/DAB signal if the clock was not set in

advance.

Follow the below steps to set the time and date manually.

1. Turn on the unit by pressing the On/Off button (3.), then press the Mode button (7.) to select FM or DAB

mode.

2. Press the Menu button (2.) and press Tune + / - (4) button to select <System>, press Enter button (8.) to

confirm.

3. The display will show <Time>, press Enter button (8.) to enter.

4. The display will show <Set time/Date>, press Enter button (8.) to enter.

5. Set the hour and minitues by pressing Tune + / - (4) button and press the Enter button (8.) to confirm.

6. The display will change to “Set date 1-1-2020”. Then set the day / month / year by pressing Tune + / - (4)

button and press the Enter button (8.) to confirm.

7. The display will show <Time saved> meaning the time and date has been stored successfully.

8. Under the <System> <Time> setting, you can also set the hour / date format.

Please follow the below breakdown of the menu for operation.

Pressing Tune + / - (4) button to select and press the Enter button (8.) to enter/confirm.

Press Menu button (2.) again to quite the setting.

<Time>

Follow the instruction "Setting the Time & Date"

Update from Any (The system will automatically update the time and

date once receiving the RDS/DAB signal)

Update from DAB (The system will automatically update the time and

date once receiving the DAB signal)

Update from FM (The system will automatically update the time and

date once receiving the RDS signal)

No update (If you prefer to set the time and date manually, please

select this setting)

<Set 12/24

hour>

Set 24 hour

Set 12 hour

<Set date

format>

DD-MM-YYYY

MM-DD-YYYY

• The preset time will be reset completely if disconnecting the main power supply. You are

recommended to switch the system into standby mode for convenient use.

Listening to radio

FM Operation

Manual tuning

1. Turn on the unit by pressing On/Off button (3.), then press the Mode button (7.) to select FM mode.

2. Press the Tune + / - (4) button to tune your desired station.

3. Rotate volume up/down knob (5.) for the desired volume level.

Auto tuning

1. Press and hold the Tune + / - (4) button for a while then release the button. Unit will start to scan at up or

down direction until radio station received.

2. Rotate volume up/down knob (5.) for the desired volume level.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lenco PDR-065 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1.43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lenco PDR-065 Manual

Product: