694789
9
Zoom out
Zoom in
Previous page
1/58
Next page
9
Parameters
On time hours and minutes
Duration 15, 30, 45, 60, 90 minutes if the alarm is not cancelled Venus returns to standby after this time period.
Source DAB | FM |Buzzer If DAB or FM is chosen as the audio source you will also be prompted to select the Last played
station or one of the preset stations (if there are any presets).
Daily | Once | Weekends | Weekday | Choose the days on which the alarm is active. Note: if you choose Once, you are
prompted to enter the required date.
Volume (increase/decrease using the SKIP+/SKIP- button) This is the volume the alarm will build up to. (Initially the
alarm starts at a low volume and gradually gets louder to the configured volume).
In all listening modes active alarms are indicated by displaying the relevant Alarm 1 and/or Alarm 2/Alarm 3/Alarm 4 icons.
At the set time, the alarm will sound, quietly at first, then gradually building up to the configured volume. When an alarm
sounds, the bell icon will flash on the display.
To cancel a sounding alarm and switch the radio to standby press the Standby button.
2. Sleep
This will configure the sleepmode. You can choose the sleep delay time in minutes from:
Sleep Off | 15 | 30 | 45 | 60 | 90
Use SKIP-/SKIP+ button control to cycle through the options then press ENTER to select the displayed value.
When the sleep time is configured, the display will show the sleeptimer on the top right of the display. Indicating that the
sleeptimer is active.
3. Equaliser
This presents a number of preset settings plus a My Equaliser option to allow you to create your own equaliser settings.
My EQ... | Normal | Classic | Jazz | Pop | Rock | Speech
My EQ...
Treble (Use the SKIP-/SKIP+ button control to choose a value between -7 and +7)
Bass (Use the SKIP-/SKIP+ button control to choose a value between -7 and +7)
4. Backlight
The radio display has a backlight with three brightness settings, and adjustable timeout (this is the time delay, in seconds,
after which the display switches to the Dim level).
There are three settings:
Timeout - Light On | 10 | 20 | 30 | 45 | 60 | 90 | 120 | 180 seconds
On level - Low | Mid | High
Dim level - Low | Mid | High
Note: as you cycle through the possible values, an asterisk appearing to the right-hand side of the display indicates the
currently selected value for each setting.
5. Language
The language used for display messages can be selected from:
Language
English, Deutsch, Francais, Nederlands, Español, Italiano, Portugues
6. Factory reset
A factory reset clears all user defined settings, replacing them with the original default values, so time/date,
preferences/settings, DAB station list and preset stations are all lost.
If you select Factory reset, you are asked to confirm by selecting Yes.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco PDR-050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco PDR-050 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info