792966
10
Zoom out
Zoom in
Previous page
1/142
Next page
10
<Backlight>, <Language>, <Factory Reset>, <Software upgrade> and <SW
version>.
7.1.
Sleep setting and Turn off Sleep timer
Rotate “Rotary button (07)” or Press (03)” or “ (04)”button to
select <sleep> in the menu, Press “Rotary button (07)” enter sleep
setting menu.
Rotate the “Rotary button (07)” or Press (03) or (04)button
to select the desired sleep time. You can select <15 minutes>, <30
minutes>, <60 minutes>, <90 minutes>, <120 minutes> or < Sleep off>.
Press the “Rotary button(07)to activate the selected duration.
Press “MENU/INFO (02)” to return previous menu.
Note: when a sleep time is active, the remaining time digits will display
on the top right corner of LED display, and then it will start counting
down every minute, e. g. S120, means this device will go into standby
after 120minutes. The time digits and battery symbol will appear
alternatively on the top right corner of LED display.
7.2.
Alarm setting
Important note: The alarm can not be used when Lenco PDR-040 is
powered off.
This means that the alarm can only be used when the device is
connected to an external power source: it will never work on the
battery to avoid that the battery could be empty when you need to
wake up.
You can set up two separate Alarms on this device, for the Alarm tone,
you can select DAB radio, FM radio or Buzzer.
Setting the Alarm 1:
Rotate the “Rotary button (07) ” or Press “ (03) ” or “ (04)
button to select <Alarm>
select “Alarm 1”, Press the “Rotary button (07) twice times to enter
the “Alarm 1 setup
The hour digits will flash on the display, Rotate “Rotary button (07)
or Press (03) ” or “ (04) button to adjust the hour.
Press the “Rotary button (07)” to confirm the hour. Now the minutes
are flashing. Set the minutes like you did with the hours.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco PDR-040 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco PDR-040 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 3.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info