Manual Lenco PDR-03 (page 7 of 69) (English, German, Dutch, French, Spanish)

601872

Zoom out

Zoom in

1/69

Follow the steps to manually update the time and date.

Press and hold the INFO/MENU button to find the <Main menu>

and press ENTER, press / and press ENTER to enter the <Time

setup>. Then press ENTER button to enter the selection interface.

Press / button to select the digits of the time and date.

1. Set clock> Press ENTER> 00:00(Hour:Minutes)> Press / to

select the Hour digits> Press ENTER> Press / to select the

Minute digits> Press ENTER to confirm.

2. Set date> Enter the date 01-01-2014 (Day-Month-Year)>

Use the above steps of SET CLOCK to select the digits of the

date, press ENTER to confirm.

3. Auto update> Select No update or From radio> Press ENTER

to confirm selection.

*If selected NO UPDATE, the time and date will not update from

the system, and you should manually set the time and date.

*If selected FROM RADIO, the time and date will auto update

from the system if it detects the RDS signal. But if the RDS

signal is not strong enough, the time/date will not update.

4. After finish the steps above, the time is set up manually.

Manual set Time

When the <Alarm 1: off> appears,

1. Press ENTER button to set the alarm ON, press / until the

screen display as: Time: 00:00, then press ENTER.

Use the / to select alarm digits, press ENTER to confirm.

2. Select the alarm days: Daily, Once, Weekdays, Weekends.

3. Set the alarm mode: DAB, FM, Buzzer.

*If you choose the DAB or FM mode as the alarm mode, when the

alarm goes on, the unit will turn on to the corresponding radio.

*If you choose the Buzzer mode, when the alarm goes on, there

comes a audible sound, press ENTER button to set the alarm to

the nap mode, and the alarm will goes on again 5 minutes later.

Press and hold the SLEEP button can stop the alarm.

4. Set the presets, this option enables the unit to turn on from the

preset station or the last listened station if unit is set to alarm in

FM or DAB mode with preset stations.

5. Set the alarm volume level, there is a slide bar for adjusting the

alarm volume, press / buttons to increase or decrease the

volume level, press ENTER to confirm.

6. After all the above steps, enter the SAVE interface, press ENTER

Set the Alarms

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lenco PDR-03 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 4,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lenco PDR-03 Manual

Product: