694791

Lenco PDR-020 Manual

6
Zoom out
Zoom in
Previous page
1/44
Next page
6
Memory
When you power up the radio again after a switch off.it will automatically tune into the same station
(DAB of FM) that was last selected.
Storing stations
You can store up to 10DAB stations to the memory presets for quick and easy recall of your favourite
stations.
To store a preset, you must first be listening to the station that you would like to save. Press and
hold the PRESET button. The display will show “Preset Store<#: (Empty)>”. If a station is already
stored. The display will show “<#: Station name>”.
Press the PREV/NEXT buttons to select the preset station number 1-10.
To save to the selected preset station number, press the ENTER button. The display will then show
“Preset# stored”.
Recalling a stored station
Once you have saved a station to one of rthe preset buttons, you can:
Press the PRESET button and press the PREV/NEXT button to select your desired preset station’s
number.
Press the ENTER button to recall a preset station number.
Station information on DAB mode
Press the INFO/MENU button repeatedly to show the different program information.
Signal Strength: Displays a signal bar with the strength of the current station.
Bit Error Rate (BER): Provides daails of the signal error rate.
Channel and Frequency: Displays the station’s transmission channel number and frequency.
PTY (Program Type): Shows the type and description of the program provided by the DAB station.
Time and Date: Displays the time and date information provided by the broadcaster.
DAB indicatiom: Indicates DAB mode.
Dynamic Label Segment (DLS): Displays scrolling text information supplied by the broadcaster.
FM opearation
In order to switch the radio from DAB to FM mode, press the Power/Mode button once.
Auto scan
To search for an FM station, press the SCAN button. This will start scanning up the frequency band.
To scan down the frequency band. Press and hold the SCAN button.
Once a station has been found.the scanning will stop automatically. If no station is found, then the
tuning will stop one it has cycled through the entire FM band (87.5-108 MHz).
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco PDR-020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco PDR-020 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info