792978

Lenco ODR-150 Manual

8
Zoom out
Zoom in
Previous page
1/77
Next page
8
Initial use
Before operation, please make sure that the VOLTAGE mentioned on the power supply is same as
the voltage of your local area.
Use the supplied mains adaptor to connect the device to a household mains socket.
Long press the “Power” button to switch the device.
Basic operation-getting started
Basic operation-getting started
1. Plug in the power adaptor, fully extend the antenna, long press the “Power” button.
2. The display backlight will Light up andthe clock(00:00)(Time is not set) will flash
3. On the very first use the DAB mode will automatically be selected and the radio will perform
a full scan. The display will show ‘Scanning’with a bar indicator showing the scan progress and
the total number of stations found.
4. When the scan is finished the radio will play the first alphanumerically found station. If the
radio does not find any stations, ‘No DAB Station’ will be displayed.
5. Adjust the volume to the desired level using the “VOL(+/-)” knob.
6. Press the stations button and use knob to scroll through the stations list. Press the “Enter” knob
on your favorite station.
7. Press the “Mode” button to switch between DAB, FM, Bluetooth and Aux input mode,
8. Long press the“Power” button to switch between standbyand working mode.
9. Press “EQ” button to select the EQ from Normal, Classic, Jazz, Pop, Rock, Speech, My EQ…..
Using the radio- DAB mode
DAB Mode- Full scan
This function will scan for all available DAB stations, Band III channels.
In DAB mode, press “Menu” button and rotate the “Enter” knob to select ‘Full Scan’, then short
press the “Enter” knob to start the DAB full scan. When the scan is finished, the radio will return to
the last played DAB radio station. All stations found will be listed in the station list, which is show
when pressing the ‘stations’ button.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco ODR-150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco ODR-150 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info