477354
8
Zoom out
Zoom in
Previous page
1/59
Next page
PLAYBACK
z SELECT “TAPE” FUNCTION (16).
z PUT IN THE CASSETTE TAPE.
z PRESS PLAY “ KEY TO ACTIVE PLAYBACK
z ADJUST THE VOLUME AT MAIN UNIT (3) AND SUB-WOOFER (29 ) TO THE DESIRE LEVEL.
z USE PAUSE KEY WHEN YOU WANT TO STOP PLAYBACK TEMPORARILY.
z PRESS STOP / EJECT KEY WHEN FINISHED.
RECORDING
THE CASSETTE DECK CAN RECORD ALL FUNCTIONS MODEL (CD/TUNER/USB/SD/iPod) AS FOLLOWING
PROCEDURES:-
z SELECT THE FUNCTION WHICH YOU WANT TO RECORD TO CASSETTE TAPE.
z INSERT A BLANK CASSETTE TAPE IN CASSETTE DECK.
z PRESS
RECORD” & “ PLAY “ KEY TO START RECORDING.
z START THE PLAYBACK OF THE MUSIC SOURCE WHICH YOU WANT TO RECORD TO TAPE
z PRESS “PAUSE” KEYS AND THEN “STOP/EJECT” KEY AT CASSETTE DECK WHEN FINISH.
PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA OR MEMORY CARD
CONNECTING
THE SYSTEM IS ABLE TO DECODE AND PLAYBACK ALL MP3 FILE WHICH STORED IN
THE MEMORY MEDIA WITH USB CONNECTING PORT, MULTI- MEDIA CARD (MMC)
OR SECURE DIGITAL (SD) MEMORY CARD.
1. PRESS FUNCTION BUTTON (16) TO SELECT “ USB OR CARD ” MODE.
2. PLUG-IN THE USB PLUG WITH THE FACE UP & MAKE SURE IT GOING INTO
COMPLETELY OR INSERT THE MEMORY CARD IN THE DIRECTION OF THE
ARROW AS SHOWN IN THE LABEL ON THE UNDERSIDE OF THE MEMORY CARD
SLOT COVER. INSERT STRAIGHT WITHOUT BENDING.
z CONNECTING THE USB / MEMORY CARD UPSIDE DOWN OR BACKWARDS COULD DAMAGE THE AUDIO
SYSTEM OR THE STORAGE MEDIA (USB / MEMORY CARD). CHECK TO BE SURE THE DIRECTION IS CORRECT
BEFORE CONNECTION.
3. THE SYSTEM WILL START READING THE STORAGE MEDIA AUTOMATICALLY AFTER CONNECTING, AND LCD
DISPLAY (2) WILL SHOW THE TOTAL NUMBER OF MP3/WMA FILES AND TOTAL NUMBER OF ALBUM BEING
DETECTED.
4. REPEAT THE SAME PLAYBACK PROCEDURE AS PLAYING CD/MP3 DISC AS ABOVE
REMARK
- THE SYSTEM CAN DETECT AND READ THE FILE UNDER MP3 AND WMA FORMAT ONLY THROUGH THE USB
PORT/MEMORY CARD SLOT.
- IF CONNECT THE SYSTEM TO MP3 PLAYER VIA THE USB SOCKET, DUE TO VARIANCES IN MP3 ENCODING
FORMAT, SOME MP3 PLAYER MAY NOT BE ABLE TO PLAY VIA THE USB SOCKET. THIS IS NOT THE
MALFUNCTION OF THE SYSTEM.
- USB PORT DOES NOT SUPPORT CONNECTION WITH USB EXTENSION CABLE AND IS NOT DESIGNED FOR
COMMUNICATION WITH COMPUTER DIRECTLY.
REMOVING OF USB / MEMORY CARD
TO REMOVE THE USB / MEMORY CARD, TURN OFF THE UNIT OR SWITCH THE FUNCTION MODE TO EITHER CD, OR
TUNER FIRST. FOR USB PORT – UN-PLUG IT BY PULLING OUT THE USB SOCKET DIRECTLY, FOR MEMORY CARD –
PRESS THE MEMORY CARD INWARD & THEN RELEASE, NOW THE CARD BEING PARTIALLY EJECT AND YOU CAN
REMOVE IT BY HAND.
MORE FEATURES
A. SLEEP SETTING (BY REMOTE CONTROL)
1. PRESS “SLEEP” BUTTON AND SLEEP INDICATOR SHOWN ON THE LCD (2).
2. KEEP PRESSING THE BUTTON TO ADJUST THE SLEEP TIMER IN THE ORDER OF 90 > 75 >60….15 MINUTES.
3. SYSTEM WILL STOP AND GOTO STANDBY MODE AUTOMATICALLY AFTER THE SELECTED TIMING.
4. TO CANCEL THE SLEEP MODE, PRESS “ SLEEP ” BUTTON UNIT IT REACHS “OFF” MODE.
E-8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco MCI-400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco MCI-400 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 5,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info