534853

Lenco MCI-220 Manual

5
Zoom out
Zoom in
Previous page
1/60
Next page
UK-4
DAB/DAB+ manual tune
1. To select manual tune, press the SELECT/FM MONO/ST. button on the unit (or remote control) to enter into the
“Manual tune” mode.
2. Press the SKIP/TUNE SEARCH (UP or DOWN) button to scroll through the DAB/DAB+ channels, the display will
show “5A to 13F” and their associated frequencies.
3. W hen your desired frequency appears in the display, press the SELECT/FM MONO/ST. button to confirm. The
name of the station group (ensemble/multiplex) will be displayed.
4. Press the STOP/MENU/INFO button o see what stations are present on the found ensemble/multiplex.
Secondary Services
On some occasions you will see a “>” symbol appeared after the name of the station, this indicates that there are
secondary services available to that station. These secondary services contain extra services that relate to the
primary station. E.g. a sports station may want to add extra commentaries. The secondary services are inserted
directly after the primary station. To select the secondary station, press the SELECT/FM MONO/ST. button on the
remote control when the “>” appears in the display.
FM mode
1. To select FM, press the DAB/FM/AUX button on the unit (or remote control), the display will show FM and the
frequency.
2. To activate frequency auto search, press and hold the SKIP/TUNE SEARCH (UP or DOWN) or PLAY/PAUSE/SCAN
/ENTER button on the unit (or remote control) until it starts to scan down or up the frequency band; it will stop
automatically once a station has been found.
3. You can also press the SKIP/TUNE SEARCH(UP or DOWN) button on the unit (or remote control) to select your
desired frequency.
4. Press the SELECT/FM MONO/ST. button on the unit (or remote control) to toggle select between the FM “STEREO”
and “MONO” reception.
STORING AND RECALLING STORED PRESET STATIONS
In either DAB or FM mode, you can store up to 30 stations to the favourite presets; this will enable you to get direct
access to your favourite stations.
1. To store a preset, first tune to your desired station, then press and hold the iPod/ID3/MEM/C-ADJ. button on the
remote control, the display will show frequency and the “#” fiash.
2. Press the SKIP/TUNE SEARCH ( UP or DOWN) button on the remote control until the display will show
“ Preset Empty # ” and the “#” fiash. to select your desired station preset number, then press the
button on the remote control to confirm your selection; the display will show “Preset # stored” in DAB/FM mode.
3. To recall a preset station, press the button once and then press the SKIP/TUNE SEARCH
(UP or DOWN) button to select the stations that you have stored, then press the button on
the remote control to confirm your selection.
Note: 1. The stored stations will be saved into its memory and power off will not erase it. Storing a new
station into a preset location will erase the previously stored station in that location.
2
t
ID3/iPod/MEM/C-ADJ.
ID3/iPod/MEM/C-ADJ.
ID3/iPod/MEM/C-ADJ.
. During the unit in STANDBY mode, press and hold the STOP/MENU/INFO button to erase all preset
memory.
In FM mode:
DISPLAY MODES
Every time you press the STOP/MENU/INFO button, the display will cycle through the following display modes:
In DAB/DAB+ mode:
Frequency
Signal strength
Auto(Mono/Stereo)
Auto(Mono) Frequency
The frequency of the present station will be displayed.
FM FM
Signal strength
The display will show a slide bar to indicate the signal
strength, the stronger the signal, the longer the bar will
be from left to right.
Time and date
Programme type
The time and date will be automatically updated by the
This describes the style of the programme that is being
broadcasted information; there is no need to set the
broadcast. If the information is not available, the display
clock manually. In the unlikely event that no clock
will show “<Programme Type>”.
information is received, the display will show
“<Time/Date>”.
Audio bit rate
The display will show the digital audio bit rate being
received.
Stereo and Mono.
Ensemble/Multiplex (Group name)
The Ensemble/Multiplex is a collection of radio stations
that are bundled and transmitted together in a single
frequency. There are national and local multiplexes,
local ones contain stations that are specific to that area.
DLS
DLS stands for Dynamic Label Segment which is a
scrolling message that the broadcaster may include in
their transmissions. The message usually includes
information such as programme details …etc.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco MCI-220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco MCI-220 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info