694794
12
Zoom out
Zoom in
Previous page
1/60
Next page
12
If it is in AUX mode more than 4 hours, it will automatically switch to standby mode. When it is 10 minutes before entering the
standby, the display will flash. You can press PLAY button to disable the auto-off function.
EQ OPERATION
You can enjoy different EQ sound effect modes. Press the EQUALIZER button will change to different sound effects of
FLAT/CLASSIC/ROCK/POP/JAZZ.
X-BASS
You can also boost the bass effect of the music. Press the X-BASS button will toggle the X-Bass effect between ON and OFF.
SLEEP FUNCTION
1. When the unit is switched on, press the SLEEP button repeatedly to select a sleep duration from either SLEEP 00 (sleep off), 90,
80, 70, 60, 50, 40, 30, 20 or 10 minutes. The sleep icon will be shown on the display.
2. When the sleep timer is zero, the unit will turn off automatically.
3. To cancel the sleep function, press the STANDBY button to turn off the unit. Or press the SLEEP button repeatedly to select
“SLEEP 00”.
ENERGY SAVING
Due to ErP stage 2 requirement and protect the environment, the unit will turn off to the standby mode automatically once no music
has been playing for about 15 minutes except in AUX mode. If it is in AUX mode more than 4 hours, it will automatically switch to
standby mode. When it is 10 minutes before entering the standby, the display will flash. You can press PLAY button to disable the
auto-off function.
To reactivate the unit, press the STANDBY button to turn on the unit.
SOFTWARE VERSION CHECK
You can check the unit software version.
1. Turn on the unit in DAB mode or FM mode.
2. Press the remote control MENU button (or press and hold the MENU/INFO button on the front panel) to access the menu
control.
3. Press the PREVIOUS or NEXT button until “SYSTEM” is displayed and then press the ENTER button.
4. Press the PREVIOUS or NEXT button until SW VER” is displayed and then press the ENTER button to show the software
version number.
5. Press the remote control MENU button to exit the menu control.
LANGUAGE SETUP
You can set the units language.
1. Turn on the unit in DAB mode or FM mode.
2. Press the remote control MENU button (or press and hold the MENU/INFO button on the front panel) to access the menu
control.
3. Press the PREVIOUS or NEXT button until “SYSTEM” is displayed and then press the ENTER button.
4. Press the PREVIOUS or NEXT button until “LANGUAGE” is displayed and then press the ENTER button.
5. Press the PREVIOUS or NEXT button to toggle between different languages. Select your desired language and then press
the ENTER button to confirm.
6. Press the remote control MENU button to exit the menu control.
FACTORY RESET
This function resets the unit to the original factory settings.
1. Turn on the unit in DAB mode or FM mode.
2. Press the remote control MENU button (or press and hold the MENU/INFO button on the front panel) to access the menu
control.
3. Press the PREVIOUS or NEXT button until “SYSTEM” is displayed and then press the ENTER button.
4. Press the PREVIOUS or NEXT button until “RESET” is displayed and then press the ENTER button.
5. Press the PREVIOUS or NEXT button until “RESET Y” is displayed and then press the ENTER button to reset the unit.
ACCESSORIES
Wire antenna x 1
Remote control x 1
Instruction manual x 1
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco MC-150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco MC-150 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info