477353

Lenco MC-146 Manual

3
Zoom out
Zoom in
Previous page
1/7
Next page
The clock setting mode will automatically quit if no button is being pressed in a period of about 5 seconds after
pressing the “ Mem/Clk-Adj ” button.
The preset time will be reset completely if the unit is being disconnected from the main power supply. You are
recommended to switch the system into standby mode for convenience usage.
Listening to the radio
Manual tuning
1. Switch on the unit by pressing the On/Standby button (10), then press the function button (5) to select “ Tuner ” mode.
2. Tune to the required station by pressing the Tuning Up or Down button (19).
3. Press the Volume knob (4) to the desired volume level.
Auto tuning
1. Press Function button (10) to select “ Tuner ” mode.
2. Press and hold the Tuning Up or Down button (19) for 1-2 seconds and then release.
3. The unit will start seeking automatically and stops when a radio station is found.
4. Repeat step 2 & 3 until the desired radio station is being reached.
5. Preset the Volume button (4) to the desired volume level.
Preset stations
You can store up to 20 radio stations in the memory
Swich to tuner mode.
1. Go to the desired radio station by “ Manual ” or “ Auto ” tuning.
2. Press and hold the Mem/Clk-Adj ” button (16) until the “ MEM ” indicator and preset station number are flashing on the LCD
display (3)
3. Press the “ Folder / Pre-up “ button (21) to select the desired memory position to store this radio station.
4. Press “ Mem/Clk-Adj ” button (16) again to confirm the setting.
5. Repeat step 1 to 4 to store other radio stations.
6. Now you can select the presets stations by pressing the “ Folder/Pre–up ” button (21)
The preset station memories will be erased completely if the unit is being disconnected from the main power supply. You
are recommended to switch the system into standby mode for convenience usage.
When you don’t push a button within 5 seconds, the unit will resume to normal tuner mode automatically.
You can overwrite a present station by storing another frequency in its place.
FM-Stereo reception
Press the “ St/Mo ” button (17) to switch from Stereo to Mono. In particular when stereo signals are weak, it is preferable to
receive the program in mono for better quality.
If a stereo signal is being received, the stereo indicator “ ” will appear on the LCD display (3).
Hints for best reception:-
- FM: the receiver has a build-in FM wire antenna (25) hanging at the rear cabinet. This wire should be totally unraveled and
extended for the best reception.
-
Playing Compact Disc
Getting started
1. Press Function button (5) to select “ CD ” mode.
2. Press CD Tray Open/Close button (20) to open the CD tray.
3. Place a CD with the printed side facing up inside the tray & then close the CD tray by press the CD Tray Open/Close
button(20) again.
4. The LCD display (3) will show the total number of tracks & total playing time. Then, the unit will start to play the CD
automatically.
5. Press the Volume knob (4) to the desired volume level.
Play / Pause mode
1. To pause playback, press the “ Play/Pause
” button (18) once. “PAUZE” will flash in the LCD display (3). Press again to
resume normal playback.
Stop mode
1. If the “ Stop
” button (17) is pressed during play or pause mode, the CD will stop playing.
Skip mode (skip up
/ skip down )
1. If the “ skip up
” button (19) is pressed during the play or pause mode, the unit will skip to the next track and continue
to play this track. The pause mode will be reverted to play mode.
2. If the “ skip down
” button (19) is pressed during play or pause mode, the unit will skip to the previous track and
continue to play this track. The pause mode will be reverted to play mode.
E-2
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco MC-146 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco MC-146 in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lenco MC-146

Lenco MC-146 User Manual - German - 10 pages

Lenco MC-146 User Manual - Dutch - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info