694803

Lenco MC-020 Manual

7
Zoom out
Zoom in
Previous page
1/37
Next page
- The alarm icon (Alarm 2) appears and the TIME display is blinking.
- Repeat same step as alarm 1 in order to set Alarm 2.
To select which of the 2 alarms should be active, press the ALARM SET button repeatedly while the unit is in standby
mode (clock display). The display will show consecutively the Alarm 1 icon, the Alarm 2 icon, the both Alarm icons. Press
the ALARM SET button once again to deactivate the alarms (no alarm icon will be displayed).
SNOOZE FUNCTION
If you want to snooze a few more minutes press the SNOOZE BUTTON will deactivate the sound for approximately 9
minutes.
SHUT OFF ALARM:
When alarm goes off, press the STANDBY BUTTON to turn off alarm, the alarm will reset until the next day
SLEEP FUNCTION
- In standby on mode
- Press the button (2) to the desired source.
- Press and hold the SLEEP button (9). The “90” will appear on the display.
- Repeatedly press the SLEEP button (9) for desired sleep time between 90, 80, 70, 60, 50, 40, 30, 20 and 10 minutes.
- The unit will automatically switch off when the SLEEP time expires.
- To turn sleep mode off, press the SLEEP button (9) until “OFF” is displayed.
RADIO OPERATION
- Press the STANDBY button (2) until the frequency shown on the display
How to use the buttons for radio
- Press the backward (7) or forward (8) button to search for desired frequency.
Automatic Tuning
- Press & hold the backward (7) or forward (8) button until the display frequency starts run
- When a station of sufficient strength has been found Tuning will stop or you can stop the automatic tuning by
pressing backward (7) or forward (8) button.
- To turn off the radio, Press and hold the STANDBY (2) button.
UNIVERSAL SERIAL BUS PORT FUNCTION (USB) to listen
- Press the STANDBY (2) button until USB icon shown on the display
- Connect USB disk into the USB (11) port of the system.
- The USB disk will play automatically
- Press the PLAY/PAUSE again to stop playing temporarily Resume normal play by pressing the PLAY/PAUSE button
again.
- To stop playback, press and hold the STOP (3) button. The total number of tracks will be shown on the display.
- To turn off the unit, Press and hold the STANDBY (2) button.
AUX INPUT JACK
- Press the STANDBY (2) button until AUX icon shown on the display
- Connect the AUX connect wire from the out jack of your Personal Player such as portable MP3 player to the AUX
input jack.
- Play Start from your Personal Player and adjust the volume
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco MC-020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco MC-020 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info