793002

Lenco MC-013 Manual

7
Zoom out
Zoom in
Previous page
1/47
Next page
7
3� Open the CD compartment (push and release the lid on the front right), and remove the cardboard
shipping protector� Close the CD lid�
4� Plug the mains power plug into the mains power wall socket and switch on� Your Micro will now be in
‘Standby’ mode�
SWITCH ON
Press and release the ‘Power’ button on the front of the Micro to switch on�
FM Radio, CD and Aux in modes are available�
Please check the display, which will conrm the mode.
SWITCH OFF
Press and hold the ‘Power’ button to go to standby mode�
To completely power off the Micro, switch off the mains power at the wall socket.
ADJUSTING THE VOLUME
Turn the rotary volume control to adjust the volume. Turn clockwise to increase the volume and anti-
clockwise to decrease the volume�
LISTENING TO THE RADIO
Please make sure that the wire antenna on the back of the Micro is fully extended and adjusted before
you attempt to tune to an FM radio station�
Check that your Micro is in FM radio mode. If you are not already in FM mode, briey press and release
the ‘Mode’ button until you are in FM mode (check the display)�
TUNING TO A FM STATION
Press and hold the Tune button to scan up the frequency band, your Micro will search for the next
available station and then stop on that station� Press and release the button to scan up the frequency
band in 0�05MHz steps�
Press and hold the Tune button to scan down the frequency band, your Micro will search for the next
available station and then stop on that station� Press and release the button to scan down the frequency
band in 0�05MHz steps�
Note: If reception is poor check that the wire antenna is fully extended or try moving the Micro to another
location�
STORING A FM STATION PRESET
Your Micro can store up to 30 FM radio stations in its preset memories for instant access to your favourite
stations�
Tune the Micro to the FM radio station that you wish to preset.
1� Press the ‘Prog’ button and ‘P XX’ starts ashing on the display (where XX is the preset number).
2� Use P+ P- buttons to move to the preset number that you would like to store the radio station to (1-30).
3� Press and release the ‘Prog’ button, ‘P XX’ will stop ashing conrming that the preset has been
stored�
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco MC-013 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco MC-013 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info