Manual Lenco LS-10 (page 6 of 32) (English, German, Dutch, French, Spanish)

694863

Zoom out

Zoom in

1/32

2. Listen to a Record

1. Raise the dust cover

2. Turn the Power On/Off/volume control switch clockwise to turn on the unit.

3. Place a record on the turntable platter and set the player speed to match the record speed.

Note: When playing a single (a 45 rpm record) and/or records with large centre holes, usethe 45 rpm adaptor.

4. Remove the needle cartridge protective cover and unlock the tone arm lock from the tone arm rest.

5. Push the lift lever backward, the tone arm will gently rise up.

6. Gently move the tone arm to the desired position on the record. If the auto stop function is on, the

turntableplatter will start to rotate.

7. Release the tone arm onto the turntable by pushing the lift lever forward, the tone arm will move towards

therecord and the music will start to play.

If the auto stop control switch is turned ON, the record will stop automatically when finished. If auto stop control

switch is turned OFF, the record will NOT stop automatically when finished; you then must push the lift lever

backward to raise the tone arm and place it back in the rest. Then turn off the power to stop the turntable from

spinning.

Please note: The auto stop function applies to most 33RPM vinyl records. However, for very few vinyl records, it will

stop before it reaches the end or it will not stop when it has come to the end of the record.

3. RCA connection

Connect the RCA Output Jack to the external speaker system (Line in) with the RCA cable (not provided) to enjoy

vinyl records music on your speaker system.

4. Headphone Socket

On the function panel you’ll find a headphone socket.

Here you can plug in your headphone with 3,5mm jack. When the headphone is connected the built-in speaker will

be switched off.

5. HOW TO REPLACE THE NEEDLE

To replace the needle, please refer to the instructions below.

Removing the needle from the cartridge

1. Place a screwdriver at the tip of the needle headshell and push downwards in the direction shown in sketch “A”

2. Remove the needle headshell by pulling it forwards and pushing downwards.

Inserting the needle

1. Hold the tip of the needle headshellAnd insert it by pressing in the direction illustrated by “B’.

2. Push the needle headshell upwardsin the direction illustrated by “C”until the needle locks into the tip

position.

Lenco

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lenco LS-10 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lenco LS-10 Manual

Product: