793267

Lenco LED-4353 Manual

66
Zoom out
Zoom in
Previous page
1/231
Next page
English - 27 -
buttons on the remote control can be used to interact
with the AV content.
Note: You can enable or disable this feature from the TV
Options>Advanced Options>HBBTV Settings menu in
Live TV mode.
Quick Standby Search
If earlier an automatic search is performed, your TV will
search for new or missing digital channels at 05:00 am
every morning while in quick standby mode.
And if the Auto Channel Update option in the Set-
tings>Channel menu is enabled the TV will wake up
within 5 minutes after it is switched into quick standby
mode and search for channels. Standby LED will blink
during this process. Once the standby LED stops
blinking the search process is completed. Any new
found channels will be added to the channel list. If the
channel list is updated, you will be informed on the
changes at the next power on.
Software Update

automatically via Internet.
         
from the latest improvements make sure your system
is always up to date.
Software update via internet
On the Home Screen enter the Settings>Device Pref-
erences>About menu in order to update your Android
system version. Move the focus to the System update
option and press OK. You will be informed about the
system status and the time at which the device was last
checked for an update will be displayed. The Check
for update option will be highlighted, press OK if you
want to check for an available update.
Note: Do not unplug the power cord during the reboot process.
If the TV fails to come on after the upgrade, unplug, wait for
two minutes then plug it back in.
Troubleshooting & Tips
TV does not switch on
 Make sure the power cord is plugged in securely to
power outlet.
 Disconnect the power cable from the power outlet.
Wait for one minute then reconnect it.
 Press the Standby/On button on the TV.
TV does not respond to the remote control
 The TV requires some time to start up. During this
time, the TV does not respond to the remote control
or TV controls. This is normal behaviour.
 Check if the remote control is working by means of
a mobile phone camera. Put the phone in camera
mode and point the remote control to the camera
lens. If you press any key on the remote control

camera, the remote control is working. The TV needs
to be checked.

be exhausted. Replace the batteries. If the remote is
still not working, the remote control might be broken
and needs to be checked.
This method of checking the remote control is not
possible with remote controls which are wirelessly
paired with the TV.
No Channels
 Make sure that all cables are properly connected and
that the correct network is selected.
 Make sure that the correct channel list is selected.
 Make sure that you have entered the correct channel
frequency if you have done manual tuning.
No picture / distorted picture
 Make sure that the antenna is properly connected
to the TV.
 Make sure that the antenna cable is not damaged.
 Make sure that the correct device is selected as the
input source.
 Make sure that the external device or source is
properly connected.
 Make sure that the picture settings are set correctly.
 Loud speakers, unearthed audio devices, neon
lights, high buildings and other large objects can

the reception quality by changing the antenna
direction or moving devices away from the TV.
  󰀨  

 Make sure that your PC uses the supported
resolution and refresh rate.
No sound / poor sound
 Make sure that the sound settings are correctly set.
 Make sure that all cables are properly connected.
 Make sure that the volume is not muted or set to
zero, increase the volume to check.
 Make sure that the TV audio output is connected to
the audio input on the external sound system.
 Sound may be coming from only one speaker. Check
the balance settings from Sound menu.
Input sources - can not be selected
 Make sure that the device is connected to the TV.
 Make sure that all cables are properly connected.
 Make sure that you select the right input source which
is dedicated to the connected device.
 Make sure that the right input source is not hidden
from the Inputs menu.
… 66 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco LED-4353 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco LED-4353 in the language / languages: English, German, Dutch, Danish, French, Spanish as an attachment in your email.

The manual is 9.61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info