Manual Lenco LBT-225 (page 7 of 122) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish)

803309

Zoom out

Zoom in

1/122

- 7 -

Locate the anti-skating weight

You will find a anti-skating weight with small fishing line from the package, please follow below steps to locate the

anti-skating weight:

1. Slip the looped end of the fishing line over the anti-skating weight adjustment stub and into the 3rd groove

(the correct anti-skating force for the factory-fitted cartridge).

2. Pull the anti-skating weight slightly to let the tie of the fishing line move to the stub.

3. Lift the anti-skating weight over the anti-skating weight wire support. The anti-skating weight should now be

dangling in free space to the left of support.

The anti-skating force must be adjusted corresponding to the down force as follows:

Down force

Groove in the stub

0.51 - 1.02g

1 st from bearing rings

1.02 - 1.53g

1.53 - 2.04g

2.04g or more

2 nd " " "

3 rd " " "

4 th " " "

Stereo System Connection

RCA Jacks

• The RCA Jacks of this unit are shared as both the Phono output jacks and the Line output jacks. They are

determined by the Phono/Line Switch.

• When used as a line output, the jacks output analog line-level signals and could be connected directly with a

pair of active speakers or the appropriate input of your stereo system. When used as a Phono output, they

should be connected to the phono pre-amplifier or the phono input of the stereo system.

• The Red plug connects with the Right channel and the White plug connects with the Left channel.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lenco LBT-225 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 1.24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lenco LBT-225 Manual

Product: