Manual Lenco LBT-188 (page 19 of 122) (English, German, Dutch, French, Spanish)

694859

Zoom out

Zoom in

1/122

Maintenance and Cleaning

Your turntable requires little of no regular maintenance. Remove dust with a

slightly damp antistatic cloth. Never use a dry cloth, this will create static

electricity and attract more dust! Antistatic cleaning agents are available at

specialist stores, but must be applied sparingly to avoid damage to rubber

parts. It is recommended to install the needle cover before cleaning or

maintenance is carried out to avoid damage.

If the turntable is not used over a long period of time, the drive belt should

be removed to prevent unequal stretching.

NOTE: Always disconnect the record player from the power supply as a

precaution before maintenance!

Useful Tips

The turntable should be positioned on a low-resonance surface such as

wood or multiple layer ply board to avoid structural vibrations disturbing

playback.

Cartridge Replacement

1. Before replacement, put the stylus protector back on the stylus to

prevent damage to the stylus during the replacement process.

2. Carefully remove the wire leads from the original cartridge.

3. Loosen the two screws on the headshell that are securing the

cartridge and then remove the original cartridge.

4. Mount the new cartridge to the headshell and tighten it lightly. Do not

completely tighten the screws at this moment.

5. Connect the wire leads to the new cartridge’s terminals. The wire lead

color codes are as below:

White Left channel positive (L+)

Black Left channel negative (L–)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lenco LBT-188 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 3,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lenco LBT-188 Manual

Product: