Manual Lenco LBT-188 (page 12 of 122) (English, German, Dutch, French, Spanish)

694859

Zoom out

Zoom in

1/122

Operation

Turntable Operation

1. Connect the included power adapter to unit and press the power

rocker switch to be “ON” position.

2. Remove the needle cover from the cartridge.

3. Place the slipmat on the platter and place a record on the slipmat. If

using 45 RPM records, put the 45 RPM adapter on the center spindle

before placing the record on the platter.

4. Set the 33/45 RPM Selector according to the type of record.

5. Turn the Start/Stop dial to the Start position to begin spinning the

platter.

6. Unlock the arm clip and set the Lift Lever to the up position.

7. Position the tonearm over the desired location (groove) on the record.

8. Move the tonearm lift lever to the down position to move the tonearm

toward the record. Alternatively, place the needle over the desired

location on the record.

9. Carefully lower the tonearm on the record.

10. When you are finished playing the record, raise the tonearm, return it

to rest on the arm clip, and turn the Start/Stop dial to the Stop.

Bluetooth Operation

This unit has a Bluetooth transmitter to send audio to a Bluetooth speaker

wirelessly.

1. Power on your Bluetooth speaker and ensure it is in pairing mode.

2. Power on the unit, the BT will auto search when the unit turn on, the

BT indicated light flashing.

3. When pairing, the light will flash twice per second, then change to be

long lighting when paired;

Note: This unit will connect to the closest Bluetooth speaker that is

near it. If after 2 minutes no Bluetooth speaker can be found to pair

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lenco LBT-188 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 3,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lenco LBT-188 Manual

Product: