793332

Lenco l CD-400 Manual

15
Zoom out
Zoom in
Previous page
1/145
Next page
15
OTHER DAB+ MENU OPERATION
Press and hold the MENU button to access the menu control. Then press the or button for different
options as described below.
Dynamic Range Control (DRC)
DRC can make quieter sounds easier to hear when the unit is used in a noisy environment. The DRC level of a
broadcast is set by the broadcaster and transmitted with the service. Changing the DRC value on your unit enables
you to apply a scaling factor to this level.
There are three levels of compression:
DRC high:
Maximum compression as sent with the transmitted service
DRC low:
Set to 1/2 that of the sent transmitted service
DRC off:
No compression
1. Press and hold the MENU button to access the menu control.
2. Press the or button until “DRC” is displayed and then press the ENTER button.
3. Press the or button to select the DRC value and then press the ENTER to confirm.
4. Press the MENU button repeatedly to exit the menu control.
Note:
- Not all DAB+ broadcasts are able to use DRC function. If the broadcast does not support DRC then the DRC
setting in the unit will have no effect.
- After you have adjusted the DRC level the sound may be louder.
Prune
This function removes invalid stations.
1. Press and hold the MENU button to access the menu control.
2. Press the or button until “Prune” is displayed and then press the ENTER button.
3. Press the or button to select “Yes” and then press the ENTER button to prune the unit.
4. Press the MENU button repeatedly to exit the menu control.
FM RADIO OPERATION
Auto Scan
1. Turn on the unit in FM mode.
2. Press and hold the SCAN button to start auto-scanning and saving the available stations (max. 30 storage).
Manual Scan
1. Press the or button repeatedly to tune to a different frequency, 0.05MHz per step.
2. Alternatively press and hold the or button to automatically search to the next available station.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco l CD-400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco l CD-400 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info