Manual Lenco L-90X (page 7 of 107) (English, German, Dutch, French, Spanish)

694856

Zoom out

Zoom in

1/107

3. MAINTENANCE

TO REPLACE THE STYLUS (FIG A):

- Secure the tone arm in place using the tone arm lock.

- Pull the orange stylus unit forward in the directoin of the

arrow and remove it.

- Put in the new stylus following the reverse procedure.

TO DISASSEMBLE THE CARTRIDGE (FIG B):

- Secure the tone arm in place using the tone arm lock

- Remove the stylus (see section above).

- Release the screws, nuts and washer and then the

headshell and cartridge can be disassembled.

- Disconnect the four link wires at the level of the pick up

head.

TO INSTALL A NEW CARTRIDGE

- Connect the four colored wires as shown in figure B.

- Push the cartridge up into the headshell.

- Reinstall the stylus.

FIG A

FIG B

BACK VIEW OF HEADSHELL

WIRING

BACK VIEW OF HEADSHELL

WIRING

WHITE

BLUE

RED

GREEN

IMPORTANT RECOMMENDATIONS

We advise you to clean your records using an impregnated rag with an antistatic product for

maximum enjoyment of your records and also to make them last.

We would also point out that for the same reason your stylus should be replaced periodically

(approximately every 250 hours).

Dust the stylus from time to time using a very soft brush dipped in alcohol (brushing from the back

to the front of the cartridge).

Basic operation

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lenco L-90X in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lenco L-90X Manual

Product: