534778
5
Zoom out
Zoom in
Previous page
1/31
Next page
5
Important note: This turntable has a built-in amplifier to avoid damage to the turntable or to your
audio-system. Do not connect this turntable to your audio-system by using the phone-input as
this input is amplified as well.
Getting started
Where to install
Keep the turntable out of direct sunlight. When the turntable is not in use, place it on
a sturdy platform of which the surface should be flat and steady, so the turntable
cannot fall. Make sure the turntable is stored in such a manner that no object can fall
on it, as pressure will damage or break the turntable. Prevent insertion of small
objects into the ventilation slots, or openings in the cabinet at all time.
Installation of the turntable
1. Open the box and unpack all parts.
2. Put the platter on the turntable and mount the belt. The
belt is on the downside of the platter.
3. Install the cartridge by placing it on the tone arm and
turn the tone arm’s anti-skate corkscrew until the
cartridge is fixed.
4. Mount and set the counterweight.
Screw the counterweight on the tone arm.
Unlock the tone arm.
Remove the protective cover of the stylus. Make sure you do not touch the
stylus, nor that the stylus touches anything.
Lift the tone arm from the armrest and lower the armrest.
Move the counterweight carefully a little either to the left or to the right until
the tone arm is in balance and floats horizontally.
Bring the tone arm back to the armrest and lock the armrest in such a manner
that the tone arm cannot move during installation.
Move the black plastic part of the counterweight to 0. The 0 should be in line
with the red line on the tone arm. Be careful that you do not move the metal
part.
Turn the metal part to the left to increase the needle
pressure. Lenco recommends to set the needle
pressure to 2,5.
5. Set the anti-skating. Lenco recommends equaling the
anti-skating to the needle pressure.
6. Place the hinges and mount the dust cover.
7. Connect the AC cable to the wall outlet.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco L-90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco L-90 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lenco L-90

Lenco L-90 User Manual - German - 35 pages

Lenco L-90 User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info