Manual Lenco L-87WH (page 7 of 111) (English, German, Dutch, French, Spanish)

694861

Zoom out

Zoom in

1/111

Select 33 or 45 rpm for playing a vinyl, switch to “STOP” to pause the playing. Switch to 33 or 45

again, to continue the playing from the pause point.

7. Signal Connectors

Plug in the RCA cable, and connect the cable to the audio amplifier.

8. Pre-Amp ON/OFF selector

* ON: Connect the RCA cable to LINE-IN terminal of the amplifier.

* OFF: Connect the RCA cable to PHONO-IN terminal of the amplifier.

Warning: pre-amp on never connect at phono input.

9. USB port

Connecting to PC for recording the music from vinyl to PC.

- With Full-Speed Transceivers

- Fully Compliant With USB 1.1 Specification

10. Power supply jack:

To plug-in DC 12V/0.3A (3.6W) switching adaptor for power supply.

11. Power Switch:

During PAUSE mode (33/STOP/45 switch is on “STOP” position), the motor is still activated,

switch off the player after use to save energy.

2. INITIAL STARTING-UP

MOUNT AND ADJUST

1) Place the aluminum turntable platter. See below, reach into the hole and pull the rubber drive

belt off of the inner ring, and install it over the motor spindle. Be careful not to twist the rubber

drive belt during this step. Check to make sure the platter rotates uniformly.

2) Insert the counterweight on the end of the tone arm, lock it into place.

3) Adjusting the stylus pressure

i. Pull down the protective cover of the stylus.

ii. Place the lever for the tone arm lift in the front position.

iii. Open the tone arm lock. Seize the handle of the tone arm and lead it to just before the

turntable platter so that it can be moved upwards and downwards. (Be careful not to hit the

stylus against anything.)

4) Turn the counterweight until the tone arm remains in a horizontal position and does not move

upwards or downwards. If the tone arm moves upwards: Turn the counterweight counter-

clockwise. If the tone arm moves downwards: Turn the counterweight clockwise.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lenco L-87WH in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lenco L-87WH Manual

Product: