7
OPERATION
1. Select the speed for the record to be played by setting the speed select
button.
2. Place a record on the turntable platter. Place the 45 rpm record adapter
over the turntable shaft when playing a doughnut style record which has
a large diameter center hold.
3. Remove the stylus protector cover and release tonearm clip.
4. Move the cueing lever to the up position, then move tonearm toward the
record. The turntable will start revolving.
5. Position the tonearm above the first groove of the record and move the
cueing lever to the down position, the tonearm will come down gently
onto the record surface automatically.
6. At the end of the record, put the tonearm back to the arm rest
and switch off the power switch on the rear panel.
How to use manual cueing:
The cueing lever is used when you want to momentarily interrupt the tonearm.
Move the lever gently to the “UP” position to interrupt the playing and to the
“DOWN” position to resume playing. Keep the cueing lever in the down
position when you are not using it.
