Manual Lenco l 80 (page 8 of 45) (English, German, Dutch, French, Spanish)

161815

Zoom out

Zoom in

1/45

SET-UP

a. Remove the stylus protective cover, if so equipped. Never touch the stylus tip during the adjustment.

b. Lower the tonearm lever.

c. Release the tonearm clamp and release the tonearm from the arm rest.

d. Set the anti-skate adjustment to zero.

e. Rotate the counterweight in either direction until the tonearm is perfectly balanced horizontally (floats

freely)

f. Return the tonearm to the arm rest and lock it in place.

g. Hold the counterweight stationary with one hand and rotate only the stylus pressure ring to bring the

number “0” of the ring into alignment with the center line on the tonearm rear shaft.

h. Rotate the counterweight clockwise until the scale value corresponding to the recommend stylus

pressure.

Note: The recommended stylus pressure of the optional cartridge that may have been included with

your unit is 2 grams. For all other cartridge systems please refer to the manufactures specification

included with the cartridge.

HEADSHELL AND CARTRIDGE ASSEMBLY :

When installing a cartridge, refer to the operating instructions of that cartridge. During installation,

attach the stylus protector to guard the stylus tip from damage.

Connect the headshell lead wires to the cartridge terminals. The terminals of cartridges and the

headshell lead wires are color coded. Connect each lead wire to the cartridge terminals of the same

color.

White (L+) L CH (+)

Blue (L-) L CH (-)

Red (R+) R CH (+)

Green (R-) R CH (-)

CONNECTIONS:

Before connecting the unit it is advised that you also consult your current equipment instruction manual.

Note: Be sure to turn off the equipment before you make changes to the different connections.

1. Connect the power cord to an AC outlet..

2. Connect the RCA cable to the PHONO input of your amplifier.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lenco l 80 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lenco l 80 Manual

Product: