792951

Lenco L-3828 Manual

5
Zoom out
Zoom in
Previous page
1/76
Next page
5
STANDBY
This device is provided with an automatic standby mode which is automatically activated after 20 minutes of non-use. In
standby mode, the power consumption of the turntable is reduced to less than 0.5 W to avoid unnecessary power
consumption. The standby mode will be interrupted automatically as soon as the speed selector is set to one of the two
speeds.
AUTO STOP
Auto stop, also known as auto shut off, uses a system to halt the record from spinning once it has finished playing or the
stylus doesn’t come into contact with the vinyl record for 5 minutes, rather than continuing to wear at the stylus.
Remark :
For power adaptor, L-3810 / L-3828 it is CE and UK version
For L-3828 the delivered cartridge is AT-95E
Some assembly required before you can begin to use your new unit. Please follow the assembly instruction below before
attempting to use you new turntable.
Before you begin assembly please be sure all parts and accessories have arrived intact.
NOTES:
Do not connect the Power Adapter before assembly has been completed.
Before turning the power on, make sure once again all the connections. Always turn off the power when connecting
or disconnecting.
Read this manual carefully before using the unit. Be sure to store the manual in a safe place for future reference.
Attach a stylus cartridge to the HEADSHELL before assembling the turntable unit.
Headshell Assembly:
When installing a cartridge, refer to the operating instructions of that cartridge.
During installation, attach the stylus protector to guard the stylus tip from damage.
Connect the HEADSHELL lead wires to the cartridge terminals. The terminals of cartridges and the HEADSHELL lead wires
are color coded. Connect each lead wire to the cartridge terminals of the same color.
White (L+) ................................................ Left channel +
Blue (L-) .................................................... Left channel –
Red (R+) .................................................... Right channel +
Green (R-) ................................................. Right channel –
Instruction manual x 1
Head shell assembly x 1
45 rpm adapter x 1
2P RCA cable x 1
Counter weight x 1
UL/PSE transfer plug x 1
Power Adapter x 1
USB cable x 1
Dust cover x 1
Platter x 1
Felt mat x 1
Hinge x 2
FEATURES EN
ACCESSORIES SUPPLIED
ASSEMBLY
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco L-3828 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco L-3828 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 3.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info