534776
24
Zoom out
Zoom in
Previous page
1/29
Next page
24
FFT Filter - Similar to Equalization, lets you enhance or reduce arbitrary
frequencies. The curve here uses a linear scale for frequency.
Invert - Flips the waveform vertically, the same as a phase inversion in the
analogue domain.
Noise Removal - This effect lets you clean up noise from a recording. First,
select a small piece of audio that is silent except for the noise, select
"Noise Removal", and click on the "Get Noise Profile" button. Then select
all of the audio you want filtered select "Noise Removal" again, and click
the "Remove Noise" button. You can experiment with the slider to try to
remove more or less noise. It is normal for Noise Removal to result in
some distortion. It works best when the audio signal is much louder than
the noise.
Normalize - Allows you to correct for DC offset (a vertical displacement of
the track) and/or amplify such that the maximum amplitude is a fixed
amount, -3 dB. It's useful to normalize all of your tracks before mixing. If
you have a lot of tracks, you may then need to use the track gain sliders to
turn some down.
Nyquist Prompt - For advanced users only. Allows you to express
arbitrary transormations using a powerful functional programming language.
See the Nyquist section of the Audacity website for more information.
Phaser - The name "Phaser" comes from "Phase Shifter", because it
works by combining phase-shifted signals with the original signal. The
movement of the phase-shifted signals is controlled using a Low
Frequency Oscillator (LFO).
Repeat - Repeats the selection a certain number of times. This operation
is quite fast and space-efficient, so it is practical to use it to create nearly-
infinite loops.
Reverse - This effect reverses the selected audio temporally; after the
effect the end of the audio will be heard first and the beginning last.
Wahwah - Uses a moving bandpass filter to create its sound. A low
frequency oscillator (LFO) is used to control the movement of the filter
throughout the frequency spectrum. Adjusts the phase of the left and right
channels when given a stereo selection, so that the effect seems to travel
across the speakers.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco L-175 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco L-175 in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lenco L-175

Lenco L-175 User Manual - German - 34 pages

Lenco L-175 User Manual - Dutch - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info