Manual Lenco KCR-100 (page 5 of 57) (English, German, Dutch, French, Spanish)

694810

Zoom out

Zoom in

1/57

ACCESSORIES

• Mounting kit (plastic plate + 2 sets of screws + 4 spacers + drill hole paper template)

Plastic plate

Spacer

Drill hole paper template

• Instruction manual

MOUNTING THE SET UNDER A CABINET

1. Decide the location to install the unit in the cabinet/shelf. Since the unit’s speakers are located on the left edge side and right

edge side respectively, it is recommended to reserve enough space to avoid blocking the sound.

2. Once the location is decided, you can use the drill hole paper template (supplied) as a guide hole location to drill the holes.

3. Install the plastic plate under the cabinet/shelf using the supplied spacers and screws, refer to the diagram below. Spacers are

optional to install as your preference. 2 sets of screws are provided for your selection. The longer screw set is usually used when

the spaces are used. Depends on the wooden board thickness, you may decide to use other suitable screw length by yourselves.

4. After the plastic plate is installed, slide the unit into it until it locks securely.

5. Due to its weight, the unit should be installed with great care. Make sure that the cabinet that is used is sturdy enough to

support the weight of the unit.

Note:

- To reduce the risk of fire, do not place the radio on any heating area or without the spacing.

- You can slide out the unit from the plastic plate and to be used as a standing kitchen radio.

Finns det bruksanvisning på lenco Modell KCR-100 på svenska
Submitted on 6-8-2020 at 11:07
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lenco KCR-100 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lenco KCR-100 Manual

Product: