407545
4
Zoom out
Zoom in
Previous page
1/18
Next page
(7) Press the SELECT button;
(8) Rotate the dial to select the option that best describes your set up (Auto, Wired Only, Wireless
Only).
If you select Auto, the system will automatically detect your settings.
If you select Wired Only, it will only connect via Wired Ethernet.
You should make sure the Wired
Ethernet lead is plugged into the RJ45 socket.
Note: There are 2 LEDs in the RJ45 Wired Ethernet socket (green for the network link, orange
indicates network traffic);
If you select Wireless Only, the radio will connect using a Wi-Fi connection.
With a wi-fi connection, the system will search for all available networks. When the wireless
network name (ESSID) for the access point you want to connect to is displayed on the screen,
press the SELECT button. You may need to enter the correct WEP (Wired Equivalent Privacy) or
WPA (Wi-Fi Protected Access) code depending on your network security settings.
If your network is not configured to request a WEP or a WPA code, the following display will
show:
Then the network is using one of the encryption systems:
WEP or WPA. You therefore need to enter the correct WEP or WPA code into the radio for it to
communicate with your network.
After 3 seconds the display will go into the code entry mode, if not, press SELECT.
To enter the code, rotate the dial to select each character of the code in turn, pressing the
SELECT button after each character.
WEP and WPA codes are case sensitive to upper and lower case characters so you must enter
them exactly as provided.
After the final character, rotate the dial to select END and press the SELECT key.
The display shows “Connecting to WiFi” as the radio connects to the network:
- 3 -
Auto
Wired Only
Wired/Wireless
Connecting to
WiFi
<{}~ END < >0
Connecting to
WiFi
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco ir 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco ir 3000 in the language / languages: English as an attachment in your email.

The manual is 4,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lenco ir 3000

Lenco ir 3000 User Manual - German - 20 pages

Lenco ir 3000 User Manual - Dutch - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info