110314

Lenco IR-2100 Manual

4
Zoom out
Zoom in
Previous page
1/125
Next page
-3-
(5)Press the SELECT button;
(6) Press Tune up or down until the display says “Wired/Wireless”;
(7) Press the SELECT button;
(8) Press Tune up or down until your appropriate equipment; there is Auto, Wired Only, Wireless
Only Options.
If you select Auto, it will be select automatically.
If you select Wired Only, It will be only used for Wired Ethernet.
You should make sure the Wired Ethernet end has been plugged into the RJ45 socket ;
Note: There are 2 LEDs in the RJ45 socket of Wired Ethernet , The green color indicate the
network link, the orange one indicate the network act ;
If you select Wireless Only, It will be only used for Wireless Wi-Fi connection.
(8) When the ESSID for the access point you want to connect to be displayed on the screen, press
the SELECT button. You might need to enter the correct WEP(Wired Equivalent Privacy) or
WPA(Wi-Fi Protected Access) code .
If your network is not configured to need a WEP or a WPA code, the display will show:
If the screen displays:
Then the network is using one of the encryption systems:
Wired Equivalent Privacy (WEP) or Wi-Fi protected Access (WPA). You therefore need to enter the
correct WEP or WPA code into the radio for it to communicate with you network.
After 3 seconds the display goes into the code entry mode or press SELECT.
To enter the code, press Tune up or down to select each character of the code in turn, pressing the
SELECT button after each character.
Make sure the character you want is shown in the centre of the display to be able to select it.
WEP and WPA codes are case sensitive to upper and lower case characters so you must enter
them exactly.
After the final character, press Tune up or down to select END and press the SELECT key.
Wired/ Wireless
Network OK
Ecryption Key Required
<{}~ END <>0
Auto
Wired Onl
y
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco IR-2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco IR-2100 in the language / languages: Dutch as an attachment in your email.

The manual is 3,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lenco IR-2100

Lenco IR-2100 User Manual - English - 26 pages

Lenco IR-2100 User Manual - German - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info