534767

Lenco IR-2002 Android Manual

6
Zoom out
Zoom in
Previous page
1/49
Next page
5
2 Getting Started
The Lenco IR-2002 app can control a radio unit via Wi-Fi Network connection. Before the Lenco
IR-2002 app can be used to control a radio unit you must first establish a connection between
the Smart Device and the radio unit(s) you wish to control.
2.1 Network Connection Setup
2.1.1 If the radio unit is using IR 2.2 or IR 2.5 firmware
1. On the radio unit, press Menu, navigate to > Main menu > System settings > Network
> Keep network connected, and select YES.
The network connection now stays on even when the radio unit is in standby mode. This setting
is saved in the radio unit’s memory.
2.1.2 Connecting to the same network
Set the Smart Device to use the same network access point as the radio unit:
1. From the main Smart Device screen, select Settings > Wi-Fi.
2. Choose the network, to which the radio unit(s) is connected, from the list.
2.1.3 Establishing a connection over a network
The first time the Lenco IR-2002 app is used over a network, if
more than one radio is found, a screen listing the available radio
units opens.
Select the radio that you want to control from the Radio list.
(You can only control one radio at a time. To change the radio
unit at a later time, the Radio list is available from the Control
menu - Settings> Radio)
If only one radio is found on the network or a radio has been
previously selected the list screen is skipped.
The first time you connect to a specific radio unit via a WiFi or
Ethernet network you are requested to enter the remote control
PIN (defined on the radio unit, refer to the radio’s User Guide for
remote PIN setting details), to allow the Lenco IR-2002 app to
remotely control the unit.
Once a valid PIN has been entered the Lenco IR-2002 app connects to the radio and displays
its current listening mode.
If no listening mode is currently active the Mode screen is displayed, to allow you to select from
the listening modes available on the radio unit. Control App only displays the modes applicable
to the currently controlled radio unit (see Section 4 Mode).
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco IR-2002 Android at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco IR-2002 Android in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info